NUPROL

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you have damaged your battery connector or you need spares for a build project, this set will sort you out! The NUPROL Mini-Tamiya Connectors Set includes 2 male and 1 female mini-Tamiya connectors with black external connectors.

The packaging states that the set includes 1 male and 2 female connectors but this is based on the external connector design. What is actually included is one connector for your gun(female) and 2 for the battery side(male), click here to see why we classify battery connectors this way.

A useful spare to have around for repairs and equally useful for scratch builds, the NUPROL Mini-Tamiya Connectors Set is a great set to have around just in case!

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

This is an open-top retention pouch designed for 5.56mm magazines, however, due to it being able to open up much wider, this pouch will work for 7.62mm magazines also.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

NUPROL's latest offering into the Airsoft Market with newly designed 0.25g green/red illuminated tracer BBs, made to be more consistent and have better accuracy that ever before. 

For those of you with some serious power requirements. This large LiPo battery is designed for crane stock use but may also be suitable for larger Airsoft hand guards too. This variant of the battery is fitted with a Deans connector.

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery with a Mini-Tamiya connector; an ideal setup for a Deans equipped rear wired M4/AR-15 AEG with a buffer tube battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 1.3cm x 1.5cm with approximately 9cm of wiring between the battery and connector

If you need a battery for your M4/AR-15 AEG buffer tube and would rather get everything you need in one place, here it is! This bundle includes a NUPROL LiPo Balance Charger, a Safe Charging Bag and a 7.4V 1450mAh LiPo Battery in Crane configurations with a Mini-Tamiya connector; an ideal setup for a Mini-Tamiya equipped rear wired M4/AR-15 AEG with a Crane stock battery compartment. 

The dimensions of the included battery are as follows: 11.4cm x 0.7cm x 1.5cm per cell group (2x cell groups on each battery) with approximately 9cm of wiring between the battery and connector. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE mounted utility pouch which has more pockets and internal pouches than you can shake a stick at.

An Alloy constructed Kill Flash for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

A 12 pack of Rail Covers, designed to provide a non-slip and more comfortable surface to 20mm RIS / RAS Rail.

A belt-mountable Double Magazine Retention Holster designed for WE Europe Airsoft F226 Standard Sized Magazines, allowing users ready and easy access to their magazines.

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 2.7L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store all your spare batteries when they're not in use. It features a zip-up fastening mechanism for the ultimate safe storage.

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

A tough little TSA-compatible lock designed specifically for the NUPROL series of hard cases, but will work with most suitcases and containers thanks to the thin gauge cable.

An extremely lightweight and low profile back and shoulders panel of MOLLE, which affords the user maximum manoeuvrability, comfort and connects to a belt system/MOLLE via simple fabric loops.

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

A RIS compatible mount for your 'Action Camera', which allows you to mount a wide range of compact cameras to your replica, helmet, or anywhere with a 20mm RIS rail.

A TSA Certified padlock with a cable type shackle that is incredibly useful for securing your luggage, rucksacks and Airsoft cases. It is designed to work with NUPROL's vast range of hard cases, but can be put to any use with enough imagination.

A magazine pouch for Airsoft pistol magazines, which can be attached to MOLLE Compatible rigs, vests and backpacks.

A retention holster designed to fit snugly WE Europe Big Bird Series Series Airsoft Pistols and can be attached to the users belt.