Airsoft Mounts

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you want to shoot while you shoot, we suggest a sight mounted to your sight! The WADSN LPVO Mount Offset Optic Base is designed to mount to the WADSN LPVO 30mm Scope Mount and provide an instantly accessible red dot sight. This mount base is compatible with RMR, T1 and T2 style sights, and may also fit others. The mount is constructed from aluminium with steel screws, and comes with an Allen key and a Torx key so you don't have to rummage in your toolbox! 

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

A replacement side mount plate for CMYA AK47/74 series Airsoft AEG weapons, which when fitted allows users to install AK style side-mounted scope mounts. 

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. This mount is unique in that a scout flashlight can be mounted directly to the mount using screws thus saving you a bit of weight and space. Of course other devices can be mounted using the Picatinny rail.

The rail is a 20mm Picatinny type, measuring roughly 1.25 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you're searching for a sling mounting solution for your M4/AR-15 AEG, the Delta Armory CQD Sling Plate for M4/AR-15 AEG is ideal. Constructed from steel for maximum strength, this CQD-style sling plate allows you to mount a single-point sling to either side of your sliding stock M4/AR-15 AEG, ideal for left or right-handed shooters. The plate can also be paired with a front sling point if you prefer a two-point sling. Compatibility-wise, this plate should fit any Marui-spec M4/AR-15 AEG with a sliding stock but won't work with fixed stocks or PDW stocks.

A Sling Plate designed to fit on M4 Style Airsoft 6mm BB Guns, fitting on AEG Electric Rifles between the Receiver and the Buffer tube allowing the attachment of Slings.