Airsoft Magazines

A 145rnd clockwork wound high capacity magazine for the Well R-4 series of SMG-7 styled Airsoft AEP.

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

A Green Gas, 22 round magazine for the UMAREX Heckler & Koch VP9 GBB Pistol.

If you need to load up on MPX magazines you have found what you need! This 100rnd Mid Cap Magazine is designed for the SigAir/VFC MPX AEG and is a rattle free mid-cap design which holds 100 6mm BBs. The fill/feed port is located at the top of the magazine and it can be loaded using a standard Airsoft speed loader or loading tool.

This magazine design perfectly mimics that of the real thing, including its clear polymer body and detailed mock 9x19mm cartridges visible through the body. The sides, front and rear boast moulded in gripping texture to avoid potentially dropping or throwing the magazine during a reload in wet weather and these can do double duty as a makeshift grip for shooting in unconventional positions. On the left side of the magazine we are also treated to licenced trademarks, with "SIG SAUER 9x19" proudly displayed in recessed lettering. If one could call a magazine beautiful, it would be this one!

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 70rnd Mid-Cap Magazine is compatible with the Double Bell BY-805 SCAR-H AEG ONLY and is of a mid-cap design. It is filled via the feed lips located at the top of the magazine. All you need to do to ready this mag for battle is fill it up with BBs through the feed lips and then it's ready to go. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

Pick up some spare magazines for your Double Bell BY-805 SCAR-H AEG and rule the skirmish field with your iconic replica and plenty of mags to spare!

A 600rnd High Capacity Magazine for the BOLT BR-47 series, that is filled by pouring BBs through the top Fill Window, and wound via the Clockwork Winding Wheel on the base. The Magazine closely matches a popular model for modern AK enthusiasts. If you want to stay in the game for longer, then stock up on Spare Magazines today.

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!

If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!

A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.

A spare magazine for VZ.58 AEGs, externally, this magazine is a close replica of the real steel 30-round 7.62x39mm magazine for the real steel VZ.58. While externally the VZ.58 may closely resemble the AK-47, the real steel variant shares no parts with Kalashnikov Rifles, including the magazines. This magazine has a steel shell housing and polymer internals, it is strong and has extremely reliable feeding. Much like its real steel counterpart, this magazine features the classic ribbed texture adding to the realistic aesthetic and making it easier to handle and manipulate.

As this is a medium capacity (mid-cap) design, it is filled using a speed loader directly into the feed lips, meaning it has great capacity and without any rattle during movement. The ammunition is loaded directly into the Airsoft gun from the magazine's feeding tube using its steel spring, so there is no winding mechanism present on the magazine.

This is the perfect spare magazine for Airsoft VZ.58 replicas if you need more ammo to get the operation done.

A green gas magazine designed for the ICS BLE-XFG range of pistols. Holds up to 19 rounds

Looking for spare mags for the G&G PCC45? You have found them! Featuring robust clear polymer construction keeping the weight down and dummy round inside for enhanced realism, this is basically the perfect airsoft mag! Who doesn't love the look on their puzzled friends' faces as they wonder how you got a real .45 ACP submachine gun?

A replacement or spare magazine designed for the Well R-4 SMG-7 Airsoft Electric Pistol, and is based on the real MP7's short compact magazine. 

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.

A Spare Magazine for the CZ SP-01 Shadow gas blowback Airsoft pistol, designed by Action Sports Games, and licensed by Česká zbrojovka Uherský Brod. This magazine will also work with the new CZ Shadow 2 GBB Pistol.

A spare or replacement magazine for the Cyber Gun FNX-45 Tactical, which offers a choice of either Black or Tan Baseplate to match your Pistol. It is filled with BBs using a Speedloader to feed them through the Polymer Feed Lips, and filled with Gas via the Inlet Valve on the back of the Magazine. If you own a Cyber Gun FNX-45 and want to stay in the fight longer without having to retreat, then you need some spare Magazines.

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.